网上棋牌

余热回收装置生产厂家

Jinan Yuhong Thermal Energy Equipment Co., Ltd. Contact: Chen Yutao Mobile Phone: 13864086360
Email: yuhong329@163.com
Website: hetengyun.com
Address: No. 125 Wang Zhouzhuang, Qiandian Town, Huaiyin Section, Jinan City, Shandong Province


Main Products: Waste heat recovery, waste heat recovery device, waste heat recovery manufacturers

news

Application range of air compressor in waste heat recovery

Update Time: 2019-07-02 Hits: 507

When the air compressor is operating, about 80% of the electricity is converted into heat and discharged into the air through air or water cooling. According to hydrodynamics, the conversion of air potential energy during compression will generate a large amount of thermal energy. If the heat of the compressor is not exhausted, it will affect the normal operation of the air compressor and the quality of the compressed air. This is where we can perform waste heat recovery . The following Yuhong thermal energy equipment will explain the application scope of air compressor waste heat recovery.

1. The most common is the production of hot water, used for bathing, etc. The working environment such as casting, metallurgy and mining is relatively poor. The waste heat of the waste air compressor can be heated to 50 to 60 ° C for workers to take a bath. In particular, factories and mines can provide boiler heating independently, preheat the boiler in advance, or use air compressors to recover waste heat and then directly supply heat, which not only reduces energy consumption costs, but also avoids environmental pollution.

2. Reverse osmosis pure water preparation heat: The food, beverage, semiconductor and pharmaceutical chemical industries often use a large amount of reverse osmosis pure water in the production process. Pure water needs to be prepared at a specific temperature of 25 ° C. When temperatures fall below 25 ° C in spring, autumn and winter, the equipment must be put in and fuel is used to heat the water. Recovering the waste heat of the air compressor is used to produce pure water, which not only reduces the fuel consumption, but also reduces the input cost of heating equipment.

3. Heating: In the Yangtze River Basin and northern regions, heating is required in winter, and this part of the heat is usually provided by boiler heating. Now the waste heat of the air compressor is used for heating, which not only saves energy consumption, but also reduces the installed capacity of the boiler, further reducing equipment investment.

Air compressor waste heat recovery is a very environmentally friendly energy saving method and a highly respected energy saving method. The waste heat recovery of the air compressor is to transfer the high temperature oil of the air compressor to cold water through heat exchange and other technical processes. After the cold water is heated, it flows into the thermal insulation water storage bucket, so that the heat energy can be recovered.



Waste heat recovery manufacturer Jinan Yuhong Thermal Energy Equipment Co., Ltd. Main: waste heat recovery, waste heat recovery device.

Waste heat recovery procurement hotline: 13864086360

鲁 ICP 备 16013833 号 -2

Site map